AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 586 / 650

User's Manual 586 Document #: LTRT-65432
MP-11x & MP-124
44.11.5.2 Call Waiting Parameters
The call waiting parameters are described in the table below.
Table 44-43: Call Waiting Parameters
Parameter Description
Web/EMS: Enable Call Waiting
[EnableCallWaiting]
Enables the Call Waiting feature.

[0] Disable

[1] Enable (Default)
If enabled, when an FXS interface receives a call on a busy
endpoint, it responds with a 182 response (and not with a 486
busy). The device plays a call waiting indication signal. When
hook-flash is detected, the device switches to the waiting call.
The device that initiated the waiting call plays a call waiting
ringback tone to the calling party after a 182 response is
received.
Notes:

The device's Call Progress Tones (CPT) file must include a
Call Waiting ringback tone (caller side) and a call waiting
tone (called side, FXS only).

The EnableHold parameter must be enabled on both the
calling and the called side.

You can use the table parameter CallWaitingPerPort to
enable Call Waiting per port.

For information on the Call Waiting feature, see Call Waiting
on page
287 .
EMS: Send 180 For Call Waiting
[Send180ForCallWaiting]
Determines the SIP response code for indicating Call Waiting.

[0] = (Default) Use 182 Queued response to indicate call
waiting.

[1] = Use 180 Ringing response to indicate call waiting.
Call Waiting Table
Web: Call Waiting Table
EMS: SIP Endpoints > Call Waiting
[CallWaitingPerPort]
This table parameter configures call waiting per FXS port. The
format of this parameter is as follows:
[CallWaitingPerPort]
FORMAT CallWaitingPerPort_Index =
CallWaitingPerPort_IsEnabled;
[\CallWaitingPerPort]
For example:
CallWaitingPerPort 0 = 0; (call waiting disabled for Port 1)
CallWaitingPerPort 1 = 1; (call waiting enabled for Port 2)
Notes:

Index denotes port number, where 0 denotes Port 1.

This parameter is applicable only to FXS ports.

For a detailed description of this table, see Configuring Call
Waiting on page
311 .
Web: Number of Call Waiting
Indications
EMS: Call Waiting Number of
Indications
[NumberOfWaitingIndications]
Defines the number of call waiting indications that are played to
the called telephone that is connected to the device for Call
Waiting.
The valid range is 1 to 100 indications. The default is 2.
Note: This parameter is applicable only to FXS ports.