AudioCodes Media Pack MP-11x, Руководство пользователя

Страница: 56 / 650

User's Manual 56 Document #: LTRT-65432
MP-11x & MP-124
4.1.8.3 Editing a Scenario
You can modify a Scenario as described in the procedure below.
Note: Only Security Administrator Web users can edit a Scenario.

To edit a Scenario:
1. Open the Scenario.
2. Click the Edit Scenario button located at the bottom of the Navigation pane; the
'Scenario Name' and 'Step Name' fields appear.
3. You can perform the following edit operations:
•
Add Steps:
a. On the Navigation bar, select the desired tab (i.e., Configuration or
Maintenance ); the tab's menu appears in the Navigation tree.
b. In the Navigation tree, navigate to the desired page item; the corresponding
page opens in the Work pane.
c. On the page, select the required parameters by marking their corresponding
check boxes.
d. Click Next .
•
Add or Remove Parameters:
a. In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
b. To add parameters, select the check boxes corresponding to the desired
parameters.
c. To remove parameters, clear the check boxes corresponding to the desired
parameters.
d. Click Next .
•
Edit Step Name:
a. In the Navigation tree, select the required Step.
b. In the 'Step Name' field, modify the Step name.
c. On the page, click Next .
•
Edit Scenario Name:
a. In the 'Scenario Name' field, edit the Scenario name.
b. On the displayed page, click Next .
•
Remove a Step:
a. In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
b. On the page, clear all the check boxes corresponding to the parameters.
c. Click Next .
4. After clicking Next , a message box appears notifying you of the change. Click OK .
5. Click Save & Finish ; a message box appears informing you that the Scenario has
been successfully modified. The Scenario mode is exited and the menus of the
Configuration tab appear in the Navigation tree.