AudioCodes 405HD, Руководство администратора

Страница: 86 / 242

400HD Series IP Phones
Administrator's Manual 86 Document #: LTRT-11973
5.4.2 Configuring CPT Regional Settings
It's important to match your phone's Call Progress Tones (CPT) to the country in which your
phone is located.
 To configure regional location:
•
Use the table as reference.
Table 5-20: Regional Parameters
Parameter Description
voip/regional_settings/selected_country Defines the country in which your phone is located. The
behavior and parameters of analog telephones lines
vary between countries. CPTs are country-specific. The
phone automatically selects the correct regional
settings according to this parameter. Supported
countries are:

Israel

China

France

Germany

Netherlands

UK

Brazil

Italy

Argentina

Portugal

Russia

Australia

USA (Default)

India
voip/regional_settings/use_config_file_v
alues
Enables the user-defined CPT. When this parameter is
enabled, the 'selected_country' parameter is not
relevant and the CPT values below can be determined
by the user.

0
- Disable (default)

1 - Enable
Call Progress Tones (CPT)
Note:
Up to 10 CPTs can be configured ( voip/regional_settings/call_progress_tones/0…9 ).
voip/regional_settings/call_progress_ton
es/%d/enabled
Enables the specific CPT.

0 - Disable

1 - Enable
voip/regional_settings/call_progress_ton
es/%d/name
Defines the name of the CPT.
voip/regional_settings/call_progress_ton
es/%d/cadence

Defines the cadence type of the tone.

0 - Continuous signal

1
- Cadence signal

2 - Burst signal