Instructions
PORTABLE HEADPHONES ATH-ES700
●For long-time storage, keep the headphones in a well-ventilated place
without high temperatures and humidity.
●The earpads deteriorate over time due to use or storage. For information
about replacing headband pads or other parts, or for information about
other serviceable parts, contact your Audio-Technica dealer or service
center.
132414241
■
Cleaning
Get into the habit of regularly cleaning your headphones to ensure that
they will last for a long time. Do not use alcohol, paint thinners or other
solvents for cleaning purposes.
●Cleaning the headphones
To clean, wipe with attached cleaning cloth.
●Cleaning the cords
If the cords have become soiled (by perspiration, for instance), wipe
them with a dry cloth immediately after use. Using cords which are
dirty may cause them to deteriorate, become hard and give rise to
problems.
●Cleaning the plug
Using the plug when it is dirty may cause intermittent sound or noise.
When the plug is dirty, wipe it with a dry cloth.
●Cleaning the earpads and headband
To clean, wipe with a dry cloth. Earpads and headband may fade if sweat or
water dries on them. If the earpads get wet, we recommend wiping them
with a dry cloth and allowing them to dry in the shade.
1.
Minimize the volume of each sound device, then connect the
headphones to the headphone terminal.
2.
Please make sure to position the earpads correctly (Left / Right
position and with the earpad covering the whole ear).
3.
Turn on your audio device, and adjust volume as necessary.
※Please also read instruction manual of audio device.
■
Swivel mechanism
The housing folds flat.
* The swivel mechanism cannot turn more than 90 degrees.
Do not apply excess force when locking it.
Thank you for purchasing these headphones. Before using these headphones,
please read through these operating instructions to ensure that you will use the
headphones correctly.
2013
Audio-Technica Corp.
Driver
： Dynamic φ42 mm
Output sound pressure level
： 104 dB/mW
Frequency response
： 5 〜 30,000 Hz
Maximum input power
： 1,000 mW
Impedance
： 56 Ω
Weight
： 160 g (Without cord)
Plug
： φ3.5 mm gold-plated stereo mini plug (L shaped)
Cord length
： 1.2 m (Y type)
Accessory
： Pouch, Cleaning cloth
Sold separately earpads
： HP-ES700
(For product improvement, this product is subject to modification without notice.)
■
Connection samples
Folded flat
Portable
audio players
1.2 m cord
φ3.5 mm gold-plated
stereo mini plug (L shaped)
Swivel
LEFT
RIGHT
Headband
Slider
Earpad
Housing
Bushing
Arm
Swivel
LEFT/RIGHT
■ Specifications
■ Headphone parts
Please confirm each part before using these headphones.
■ How to use
