Audio Technica AT-LPW30TK Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 15

Audio Technica AT-LPW30TK Скачать руководство пользователя страница 2

1

Introduction

Thank you for purchasing this Audio-Technica product.
Before using the product, read through this user manual to ensure that you will use the product correctly. Please keep this manual for future
reference.

This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the
product are correct for the country you live in.

Package contents

Make sure that you have all the included items listed below before using this product.
If some items are missing or damaged, contact your local Audio-Technica dealer.

• Turntable body

• Turntable mat

• Platter

• Drive belt

• Counterweight

• Headshell (AT-HS4) with VM stereo

cartridge*

• Dust cover
• Dust cover hinges
• AC adapter (Approx. 1.5 m (4.9'))
• Quick start guide
• Caution guide

• 45 RPM adapter

• RCA audio cable (Approx. 1.0 m (3.3'))

* AT-LPW40WN: AT-VM95E / AT-LPW30TK: AT-VM95C
After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.

«
1
2
3
4
...
»

Содержание AT-LPW30TK
















Отзывы:

Нет отзывов