Contents
Preparation
Use the included gloves to avoid fingerprints on the turntable.
1
With the turntable turned off, set the platter.
Motor pulley
2
Attach the drive belt to the motor pulley.
3
Level the turntable.
4
Insert the headshell into the tonearm, and remove the
cartridge’s protector.
Protector
5
Attach the counterweight to the back of the tonearm, and
slowly turn it counterclockwise (to the left).
6
Unlatch the clamp.
Clamp
7
Turn the counterweight to adjust the tonearm’s balance so that
the tonearm is level when you release the headshell.
Tonearm
8
Set the tracking force gauge ring to the “0” position.
After that, turn the counterweight and the tracking force gauge
ring together counterclockwise (to the left) to the “2” position.
0
2
Tracking force gauge ring
9
Set the anti-skate control dial to “2”, the same value as the
tracking force value.
Anti-skate control dial
Dust cover hinges
Headshell with VM stereo cartridge
Counterweight
45 RPM adapter
AC adapter
RCA audio cable
Hexagonal wrench
(For tonearm height adjustment)
Gloves
Turntable body
Dust cover
Quick Start Guide
Belt-Drive Turntable
Guide de démarrage rapide
Tourne-disque à entraînement par courroie
Kurzanleitung
Riemenbetriebener Plattenspieler
Guida rapida
Giradischi
Guía de inicio rápido
Giradiscos de tracción por correa
Guia de início rápido
Toca-discos acionado por correia
Краткое руководство по установке
Проигрыватель с ременным приводом
快速启动指南
皮带传动唱盘机
快速入門指南
皮帶驅動式黑膠唱機
간편 사용 설명서
벨트 드라이브 턴테이블
Quick Start Guide
AT-LP2022
Back side with hexagonal nut
Drive belt
Platter (with drive belt)
(Remove the protective sheet before use.)
Replacement stylus
(AT-VMN95SH CL)
User Manual (Online Manual)
https://www.audio-technica.co.jp/document/AT-LP2022/
Default.html
