background image

 
 

Mute Function 
 

 

 

Remote Control: 

By  using  the  mute  function  you 
can  disable  or  enable  sound 
output from your subwoofer. 
Press the [MUTE] button for this.

 

 

 
Adjustment 

 
In order to adjust the RHEA II to your main speakers and listening room, we recommend that you take 
the following steps: 
 
Switch on the RHEA II and play some well-recorded music with broad bass content through your 
system. 

 

 
Adjust the volume level until ideal blending of the deep bass range with the rest of the music is 
obtained. At this early point of adjustment, occasional booming at single frequencies or some dryness 
or softness of the bass is insignificant. 
 
Once the volume level of the deep bass range has been set to the position which achieves truly 
seamless blending with the rest of the music, you need to select the right polarity. Use the phase 
function to set the polarity to 180° and compare the sonic results with the previous setting. Change the 
polarity repeatedly between 0° and 180° and compare the sonic results of both settings. You will 
realise that one of the two phase settings excels with an extremely balanced and homogeneous bass 
reproduction in the mid-bass region. This is the optimal phase setting for obtaining maximum listening 
pleasure. 
 
In some cases, however, a change of polarity may lead to an increase or decrease in the bass level. If 
this is the case, we suggest that you rotate the multifunction switch to adjust the volume accordingly. 
 
The next step consists of setting the right crossover frequency. While you are experimenting with the 
ideal setting, pay close attention to unnatural irruptions (the instrument is weak and appears to play 
single tones too shortly) or peaks (the instrument starts to thicken up single tones and extends them in 
an uncontrolled and unnatural way). Correct adjustment of the crossover frequency allows for an 
imperceptible bass transition between the RHEA II and the main loudspeakers. 
 
After the right crossover frequency is set, your RHEA II is perfectly adjusted to the main loudspeakers. 

 

 
When you have completed this adjustment step, we recommend that you fine-tune the volume once 
again. 
 
Now you have successfully completed the adjustment of your RHEA II subwoofer. 
You have opened the door into a new dimension of music reproduction and superb bass performance. 
Music material we recommend for adjustment of the RHEA II is also provided on the Audio Physic 
Reference CD. 
 
 

Содержание RHEA II













Отзывы: