Troubleshooting
Problem:
The RHEA II does not switch on.
Cause:
a) Power failure.
b) Fuse has blown.
Solution:
a) Check power supply cord for correct connection. Check the AC outlet (try another electrical
appliance). Use another outlet, if necessary.
b) Please contact an authorised Audio Physic dealer.
Problem:
Power available, but no sound.
Cause:
a) The polarity of a channel may be inverted when using loudspeaker inputs (‘HIGH POWER
INPUT’).
b) Input cables incorrectly connected or possibly a defective cable.
c) Safety heat fuse has blown.
d) Other defects.
Solution:
a) Ensure correct polarity of the cables.
b) Check cables for the right connection and correct function.
c) Switch off the RHEA II, allow the subwoofer to cool down, then switch it on again.
Make sure the location of the RHEA II allows for sufficient air exchange and ventilation (see
chapter “Set-up”).
d) Please contact an authorised Audio Physic dealer.
Problem:
The RHEA II does not respond to the remote control.
Cause:
a) The distance between the remote control and the RHEA II is too great.
b) The remote control is low in battery power.
Solution:
a) Reduce the distance between the remote control and the RHEA II and try again.
b) Replace the battery. Please contact an authorised Audio Physic dealer for this.
Problem:
Other faults or defects.
Solution:
Please contact an authorised Audio Physic dealer.
