LCD-9151-201-x Installation Manual
Document # 540334, Rev IR1, 10/2006
Page 15 of 20
4.2 Cleaning
Method
The LCD-9151-201-x should be cleaned at least once every three months
or when excessive dust or dirt becomes apparent.
Use a twin pack cleaning system that employs a wet pad pre-moistened
with an Isopropyl Alcohol based cleaner/anti-static solution and a lint-free
drying cloth. Audio International, Inc. recommends using “Kleen & Dry”
RR1205 manufactured by READ RIGHT, Nanuet, NY 10954.
¾
Do not
use benzene, ammonia, thinner, or any other volatile
substance to clean the monitor or screen. These chemicals may
damage the screen or internal circuitry.
¾
Do not
allow cleaner to puddle or pool around edges. Seepage
may damage internal circuitry.
Audio International’s recommended cleaning method follows:
A. Turn off monitor.
B. Open pre-moistened pad and gently wipe evenly across
display glass. Do not allow solution to “pool” or puddle
around display edges.
C. Immediately dry display using the absorbent, lint-free cloth.
Gently wipe display to a dry, clear finish.