Document # 540048, Rev A, 03/2002
Page 6 of 12
3.1.5 The purpose of the audio amplifier is to compensate for low-level
audio signals and amplify the signal to a high level. The amplifier
adjustments will be most effective when the interior is thoroughly
furnished and all pieces of furniture are in place.
3.2
Unpacking and Inspection
3.2.1 Carefully open the packaging and remove the AI-ST100X. Verify
that all components have been included in the package per the
packing list. Inspect the unit for damage. Retain the packing
materials and packing list.
3.2.2 If damage has occurred during shipping, a claim must be filed with
AI within 24 hours and a Return Request Authorization Number
must be obtained from AI. Refer to the front cover of this manual
for address and telephone number of Audio International.
Repackage the unit in its original packaging materials and return it
to AI following instructions given by the AI representative. If no
return is necessary, retain the packing materials for storage or
reshipment if necessary.
3.3
Cautions and Warnings
3.3.1 It is important to do a pin-to-pin power and ground check on all
connectors. Ensure that power and ground are applied only where
specified. Damage to the unit may result if power or ground is
applied to the wrong points.
3.3.2 The unit generates considerable heat. Allow a MINIMUM 1-inch air
space around the amplifier due to the amount of generated heat.
3.3.3 DO NOT remove any factory-installed screws. Damage to the unit
may result and void any warranties.
3.3.4 NO scheduled maintenance is required to ensure continued
airworthiness.
3.3.5 ESD (Electro Static Discharge) guidelines shall be followed.
