WARNINGS
• Read these instructions before installing or using this product.
• This product should be installed by qualified personnel.
• Do not expose this unit to excessive heat.
• Install only in dry, indoor locations.
• Clean the unit only with a dry or slightly dampened soft cloth.
LIABILITY STATEMENT
Every effort has been made to ensure that this product is free of defects. Audio Authority
cannot be held liable for the use of this hardware or any direct or indirect consequential
damages arising from its use. It is the responsibility of the user of the hardware to check
that it is suitable for his/her requirements and that it is installed correctly. All rights are
reserved. No parts of this manual may be reproduced or transmitted by any form or means
electronic or mechanical, including photocopying, recording or by any information storage
or retrieval system without the written consent of the publisher. Audio Authority reserves
the right to revise any of its hardware and software following its policy to modify and/or
improve its products where necessary or desirable.
TRADEMARKS
“Audio Authority” and the double-A symbol are registered trademarks of Audio Authority
Corp. Copyright February, 2009.
“BlueBeam” is a trademark of Audio Authority
“Bluetooth” is a trademark of Bluetooth SIG, Inc.
“PLAYSTATION” is a registered trademark of Sony Computer Entertainment Inc.
“Sony” is a registered trademark of Sony Corporation.
All other trademarks are the property of their respective owners.
LIMITED WARRANTY
If any consumer product from Audio Authority fails due to defects in materials or
workmanship within one year from the date of the original sale to the end-user, Audio
Authority guarantees that we will replace the defective product at no cost. Freight charges
for the replacement unit will be paid by Audio Authority (ground service only). A copy of
the invoice showing the item number and date of purchase (proof-of-purchase) must be
submitted with the defective unit to constitute a valid in-warranty claim. Units that fail after
the warranty period has expired may be returned to the factory for repair at a nominal
charge, if not damaged beyond the point of repair. All freight charges for out-of-warranty
returns for repair are the responsibility of the customer. Units returned for repair must
have a Return Authorization Number assigned by the factory. This is a limited warranty and
is not applicable for products which, in our opinion, have been damaged, altered, abused,
misused, or improperly installed. Audio Authority makes no other warranties either
expressed or implied, including limitation warranties as to merchantability or fitness for a
particular purpose. Additionally, there are no allowances or credits available for service
work or installation performed in the field by the end user.
2048 Mercer Road, Lexington, Kentucky 40511-1071
Phone: 859-233-4599 • Fax: 859-233-4510
Customer Toll-Free USA & Canada: 800-322-8346
www.audioauthority.com
752-600
2/11
MACROS TAB
The macros tab allows the user to define 10 custom macros, which will
execute a sequence of commands by activating only one IR command.
The power-off macro is a predefined macro, which will execute a power-off
sequence which will power off the PS3 by pressing only one button on the IR
remote.
Select macro Selects which of the 10 macros to edit
Command
Selects which IR command to execute
Duration
Specifies the time in milliseconds to activate the current
command
Pause
Specifies the time in milliseconds to pause until the next
command should be sent
Default
The default button resets the currently selected macro to
its default values
IR DEVICE CODE TAB
By default the BlueBeam responds to IR codes from the device code Sony
DVD1a, but this can be changed to any Sony device code. For ease, it is
possible to select the most commonly used device codes directly from the
selection box. Make sure that you are using a remote that is able to transmit
the selected codes, or the BlueBeam will not respond.
If you have an existing Sony DVD player that conflicts with the default
BlueBeam device code, change the device code from “DVD1a” to “DVD2a”
in the selection box and press “Save”. In the Harmony Remote software, add
a new device with the model name “BlueBeam DVD2a” to allow control of a
BlueBeam with the IR device code DVD2a.
A custom IR device code can be entered by selecting the “Custom” entry from
the selection box, and entering the code manually.
INSTALL MODULE TAB
Allows for future features to be downloaded as a firmware upgrade.
REGULATORY COMPLIANCE
The C-1071A BlueBeam has been tested for compliance with CE and FCC rules and
regulations. The optional power adapter/supply has been tested for compliance with UL,
CUL, CE, PSE, and GS regulations and guidelines. This product and its power supply are
RoHS compliant.
WARNINGS
• Read these instructions before installing or using this product.
• This product should be installed by qualified personnel.
• Do not expose this unit to excessive heat.
• Install only in dry, indoor locations.
• Clean the unit only with a dry or slightly dampened soft cloth.
LIABILITY STATEMENT
Every effort has been made to ensure that this product is free of defects. Audio Authority
cannot be held liable for the use of this hardware or any direct or indirect consequential
damages arising from its use. It is the responsibility of the user of the hardware to check
that it is suitable for his/her requirements and that it is installed correctly. All rights are
reserved. No parts of this manual may be reproduced or transmitted by any form or means
electronic or mechanical, including photocopying, recording or by any information storage
or retrieval system without the written consent of the publisher. Audio Authority reserves
the right to revise any of its hardware and software following its policy to modify and/or
improve its products where necessary or desirable.
TRADEMARKS
“Audio Authority” and the double-A symbol are registered trademarks of Audio Authority
Corp. Copyright February, 2009.
“BlueBeam” is a trademark of Audio Authority
“Bluetooth” is a trademark of Bluetooth SIG, Inc.
“PLAYSTATION” is a registered trademark of Sony Computer Entertainment Inc.
“Sony” is a registered trademark of Sony Corporation.
All other trademarks are the property of their respective owners.
LIMITED WARRANTY
If any consumer product from Audio Authority fails due to defects in materials or
workmanship within one year from the date of the original sale to the end-user, Audio
Authority guarantees that we will replace the defective product at no cost. Freight charges
for the replacement unit will be paid by Audio Authority (ground service only). A copy of
the invoice showing the item number and date of purchase (proof-of-purchase) must be
submitted with the defective unit to constitute a valid in-warranty claim. Units that fail after
the warranty period has expired may be returned to the factory for repair at a nominal
charge, if not damaged beyond the point of repair. All freight charges for out-of-warranty
returns for repair are the responsibility of the customer. Units returned for repair must
have a Return Authorization Number assigned by the factory. This is a limited warranty and
is not applicable for products which, in our opinion, have been damaged, altered, abused,
misused, or improperly installed. Audio Authority makes no other warranties either
expressed or implied, including limitation warranties as to merchantability or fitness for a
particular purpose. Additionally, there are no allowances or credits available for service
work or installation performed in the field by the end user.
2048 Mercer Road, Lexington, Kentucky 40511-1071
Phone: 859-233-4599 • Fax: 859-233-4510
Customer Toll-Free USA & Canada: 800-322-8346
www.audioauthority.com
752-600
2/11
MACROS TAB
The macros tab allows the user to define 10 custom macros, which will
execute a sequence of commands by activating only one IR command.
The power-off macro is a predefined macro, which will execute a power-off
sequence which will power off the PS3 by pressing only one button on the IR
remote.
Select macro Selects which of the 10 macros to edit
Command
Selects which IR command to execute
Duration
Specifies the time in milliseconds to activate the current
command
Pause
Specifies the time in milliseconds to pause until the next
command should be sent
Default
The default button resets the currently selected macro to
its default values
IR DEVICE CODE TAB
By default the BlueBeam responds to IR codes from the device code Sony
DVD1a, but this can be changed to any Sony device code. For ease, it is
possible to select the most commonly used device codes directly from the
selection box. Make sure that you are using a remote that is able to transmit
the selected codes, or the BlueBeam will not respond.
If you have an existing Sony DVD player that conflicts with the default
BlueBeam device code, change the device code from “DVD1a” to “DVD2a”
in the selection box and press “Save”. In the Harmony Remote software, add
a new device with the model name “BlueBeam DVD2a” to allow control of a
BlueBeam with the IR device code DVD2a.
A custom IR device code can be entered by selecting the “Custom” entry from
the selection box, and entering the code manually.
INSTALL MODULE TAB
Allows for future features to be downloaded as a firmware upgrade.
REGULATORY COMPLIANCE
The C-1071A BlueBeam has been tested for compliance with CE and FCC rules and
regulations. The optional power adapter/supply has been tested for compliance with UL,
CUL, CE, PSE, and GS regulations and guidelines. This product and its power supply are
RoHS compliant.
