HARDWARE
ANALOGUE OUTPUTS
EVO 16 provides you with separate controls for each of the headphone
outputs. Pressing the Headphone 1 or 2 button will allow you to independently
adjust the volume for each output. To adjust the output volume, simply tap
the output you wish to adjust and turn the Control Wheel. The Meter ring will
illuminate to show the current volume level.
Headphone Outputs
EVO 16 also provides you with eight dedicated line level outputs, which can
be found at the rear of the unit.
By default, pressing the Speaker button on the front of the unit, then turning
the Control Wheel will change the volume of line outputs 1+2. You can adjust
any of the other line outputs in the EVO Software Mixer.
Line Outputs
Headphone Control Buttons
Speaker Button
TRS Jack
Connection
HARDWARE
Pressing any of the hardware Output buttons will bring up the Output Status
Screen. Similar to the Input Status Screen, with a few key differences, the Output
Status Screen displays: the output name, the volume level, stereo meters, as
well as a feature status display. With an output selected, the Control Wheel will
now control the volume of that output, ranging from 0 to 100.
To quickly mute an output, hold down the channel button until the Mute
screen is shown, and the channel button begins flashing. When a channel
is muted, the volume level is replaced with the Mute icon, this will remain in
place until mute is deactivated, by again holding down the output button.
