When a channel is muted, the gain level is replaced with the Mute icon, this will
remain in place until mute is deactivated, by again holding down the channel
button.
To quickly mute a channel, simply hold down the hardware channel button
until the Mute Feature Toggle screen is shown, and the channel button begins
flashing.
M
Input Mute
HARDWARE
HARDWARE
Smartgain will now return you to the ‘Select Channels’ screen with the failed
channels automatically pre-selected, simply press Smartgain to start the
process again.
For the channels that failed, double-check your microphone cables, check
if phantom power is required for that microphone, or move the microphone
closer to the sound source. Then try the Smartgain process again.
Note: there is no need to select the green channels again as they were
already successfully set.
Green
- means it was successful
Red
- means it failed
Grey
- means the channel was not selected
