Horn
10T /
Horn
20T
Please read the manual before using the product
USER´S
MANUAL
3
Horn
10T
Horn
20T
CONNECTIONS
First of all, check the specifications of the amplifier if it is suitable for your
speaker boxes. Pay particular attention to the power rating and impedance.
Check if the amplifier is switched off. If yes, you can connect the speaker.
PLEASE NOTE! Watch the polarity (+/—). wires of the same color must be
connect to the same sign of every side i.e. the + of the amplifier must be
connected to the + of the speaker box. If the connections are inverted, the
sound quality will diminish. Only use high quality speaker cables that are
suitable for the power and distance between the amplifier and the speaker.
Connection of several speakers is connected in parallel the impedance will
change from 8 ohms to 4 ohms. Check if the amplifier can handle this. If more
that two speakers are connected in parallel, the impedance will go below 4
ohms. Most of the amplifiers can’t handle this!
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any change to the unit. This would also invalid your warranty. The
warranty is not applicable in case of accidents or damages caused by
inappropriate use or disrespect of the warning contained in this manual.
AUDIBAX cannot be held responsible for personal injuries caused by a
disrespect of the safety recommendation and warnings. This is also applicable
to all damages in whatever form.
Protect your environment. Recycle packing material whenever possible.
Do not throw a faulty into normal household waste but bring it to a
special collection point. A large part of it can be recycled.
