Audi R8 LMS 2018, Руководство пользователя

Страница: 54 / 113

400 – Front Axle, Anti-Roll Bar, Dampers and Steering
Version 1 2016-01-01
54 / 113
400 – 2.5 Camber Adjustment
Front Axle
On the front axle, the static camber is adjusted by adding or removing camber
shims between the upper wishbone mounting and the upright. A change in
camber also influences the toe angle. For this reason, the toe angle must be
corrected by adjusting the toe rod length. See table below.
Camber
change in
degrees
Camber
change in
minutes
Adjustment
shim colour
Thickness of
adjustment
shim
Toe rod
length
correction in
mm
Toe rod length
correction in
flats *)
0.25 ° 15'
blank /
metallic
1.0 mm 0.4 mm 1.5 flats
0.50 ° 30' Black 2.0 mm 0.8 mm 3.0 flats
1.00 ° 60' Gold 4.0 mm 1.6 mm 6.5 flats
*)…1 Flat equals 60 ° (hexagonal as reference). The values in the table are rounded to 0.5 flat.
Rear Axle
On the rear axle, the static camber is adjusted by adding or removing camber
shims between the upper wishbone mounting and the upright, and between the
toe rod mounting and the upright.
The static camber can be adjusted without influencing the toe angle. To achieve
this a pair of camber shims must be changed – which means the same coloured
shim must be fitted to the toe rod and the upper wishbone.