3
Safety notes on the towing
bracket – Fitting and operation
3.1
Notes on the towing vehicle
Manufacturer:
AUDI AG
Model:
Q5 2017 ►
Offic. Type designation:
FY
Maximum trailer weight or trailer drawbar load in kg, as speci-
fied by the manufacturer for the above-named vehicle model:
⇒
Vehicle registration certificate/Owner's Manual.
3.2
Notes on the towing bracket
Technical data
Vehicles with steel-spring suspension/air sus-
pension
Bosal type:
E555
Audi part no.:
80A.092.115
Bosal part no.:
10027740 with connector panel NAR
D-value:
12.6 kN
Permitted drawbar load:
200 kg
WARNING
The drawbar load figures specified on the towing bracket
identification plate are only given as test values. Vehicle-
specific figures are often lower than these values and can
be found in the vehicle documents.
Please see your vehicle documents for your maximum trailer
weight.
WARNING
Do not exceed the verified D-value and the permitted trail-
er drawbar load – risk of accident!
The towing bracket is intended for towing trailers fitted with a
tow ball and for operating carriers suitable for mounting to the
coupling ball.
Nationally applicable regulations must be adhered to in EU and
non-EU countries.
Improper use is prohibited.
Use is only permitted under favourable road conditions and
must be adapted to road conditions.
Installation instructions - Audi Q5 (80A) 2017 ► Fixed/mechanically removable towing
bracket with E-set (NAR),
Edition 01
4
3 Safety notes on the towing bracket – Fitting and operation