Audi Q5 80A 2017 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 26

Audi Q5 80A 2017 Скачать руководство пользователя страница 5

1

General notes

Please read and take note of these WARNING, Caution and
Note descriptions before carrying out maintenance or repair
work.

WARNING

Text with this symbol contains information concerning
your safety and indicates potential accident and injury
risks.

Caution

Text with this symbol indicates the risk of damage to your
vehicle.

Note

Text with this symbol contains additional information.

Caution

Towing mode places increased demands on the cooling
system.

◆

The cooling system must be adapted to the vehicle op-
erating conditions

.

Special tools are required for assembly. Improper installa-
tion can cause damage to the vehicle or the add-on parts.

WARNING

For safety reasons, the towing bracket must only be fitted
by skilled personnel – risk of accident!

AUDI AG will not accept responsibility in the event of fail-
ure to comply with these assembly instructions.

Installation instructions - Audi Q5 (80A) 2017 ► Fixed/mechanically removable towing

bracket with E-set (NAR),

Edition 01

1 General notes

1

«
...
3
4
5
6
7
...
»

Содержание Q5 80A 2017



























Отзывы:

Нет отзывов