manualshive.com logo in svg

Audi A8 2019, Обучение по обслуживанию

Поделиться
Скачать
Audi A8 2019 Скачать руководство пользователя страница 33

29

1

2

3

4

Step 4 is used to restore shift function. 
After lifting the handle, it will rotate 
counter-clockwise 140 degrees to be 
reset.

The parking lock emergency release is similar to the 2017 
Q7. The actuating mechanism is located under a cover in 
the driver's footwell. 

Parking lock emergency release

When the parking lock emergency release device 
is actuated, the yellow transmission warning 
lamp and the drive position indicator N light up 
in the instrument cluster. The following warning 
also appears: "Vehicle may roll away! P cannot be 
selected. Please apply parking brake."

662_134

662_135

662_136

Cover

Actuating mechanism

Socket wrench

Locking the parking lock (P-ON position)

Pull the parking lock emergency release device slowly  
upwards out of the actuating mechanism, position 4. If the 
device is removed quickly, it could damage the release 
mechanism.

 

›

Fit the cover.

Emergency-releasing the parking lock (P-OFF position)

 

›

Remove cover.

 

›

Insert the socket wrench into the actuating mechanism, 
position 1.

 

›

Turn the socket wrench clockwise 140°, position 2, and 
press down simultaneously, position 3.

Approximately 140°

Warning!

Before actuating the emergency release device of the 
parking lock, the vehicle must be secured to prevent it from 
rolling away.

If it is no longer necessary to emergency-release the 
parking lock, the parking lock must be locked again (P-ON 
position).

It is necessary to check the emergency release device after 
assembly work on its component parts.

Содержание A8 2019











































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды