Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
♦ Counterhold tool - T10172-
♦ Pins - T10172/1-
Table of test values and procedure guidelines:
This table specifies which component(s) to renew according to
the damage or irregularities found.
Damage/irregularities
found on:
Following component(s) must be renewed:
Poly V-belt Pulley (pow‐
er steering
pump)
Pulley
(coolant
pump)
Belt tension‐
er
Vibration
damper
Idler roll‐
ers
Poly V-belt
X
---
---
---
---
---
Pulley (power steer‐
ing pump)
X
X
---
---
---
---
Pulley (coolant pump)
X
---
X
---
---
---
Belt tensioner
---
---
---
X
---
---
Vibration damper
X
---
---
---
X
---
Idler rollers
X
---
---
---
---
X
Removal steps:
– Remove noise insulation
Procedure:
– Apply counterhold tool - T10172- with pin - T10172/1- to crank‐
shaft vibration damper (see -illustration-).
Audi A8 2010 ➤
Maintenance - Edition 11.2014
82
3. Maintenance
