AUDAC ANI22, Руководство по установке

Страница: 8 / 12

8
Step 7:
Double check whether all internal wires are well connected and well positioned. After
all connections are successfully made, the top cover of the amplifier can be re-fitted
and fixed uing the original screws.
Step 8:
To guarantee the correct functioning of the amplifier with the installed ANIxx Dante
network audio interface, verify whether the current running software version fully
supports this interfaces functions.
For SMA/SMQ amplifiers, software shall be version 1.17 or higher
The software version of your amplifier is shown on the front LCD display when
powering on the amplifier. When it is not Dante ready, you can update your amplifier
with supplied USB drive. Connect it at the front of your amplifier and update process
will start automatically.
Result:
Your amplifier is now equipped with a Dante network audio interface, allowing new
networked audio possibilties.
For more information about the functions, the connections or Dante in general, refer
to the quick start guide or Dante controller user guide.