AUBO AUBO-i10, Руководство пользователя

Страница: 25 / 179

V4.5
©2015-2019 AUBO.All rights reserved.
21
2. TRANSPORTATION AND PRECAUTIONS
When hoisting robot, the moving parts should be located properly to avoid unexpected movement
which can cause damage during hoisting and transportation. When packaging and transporting, it
should follow packaging standards and mark with the required signs outside the package.
When transporting, the robot must remain in its transport position stably.
The control box should be lifted using handle.
When moving robot from packaging to installation position, hold the robot in place until all
mounting bolts are safely tightened at the base of the robot.
Power up the robot after fixing it. Using hand-guiding to adjust robot orientation to a suitable
location.
Save the original packaging after transportation. Store the packaging material in a dry place for
future repackaging and moving the robot.
Users can move the manipulator to the installation position by using the packagePos project in the
【 Online Programming 】 -> 【 Project 】 -> 【 Open Project 】 on the AUBOPE Programming
Environment. For details, please refer to
【
Open Project
】
.(image demonstration)
1. Make sure not to overload the robot’s back or other body parts when the
equipment is lifted.
2. All regional and national guidelines should be followed. AUBO (Beijing)
Robotics Technology Co., Ltd is not responsible for any damage caused
during the transportation of equipment.
3. Make sure to follow the instruction when installing a robot.