19
Safety
.Precautions
●
It is recommended to back up stored data on a microSD memory
card to another microSD memory card, a PC, etc.
●
When discarding microSD memory cards, in order to prevent the
saved information from leaking, it is recommended breaking the
memory card physically as well as deleting the saved information
before discarding. Manage stored information on microSD memory
cards at your responsibility.
●
If the battery level is low, the power may turn off while saving data
and data may not be stored normally. In order to protect data
from being damaged, it is recommended to save data when the
remaining battery is sufficient.
■.Backup.content.on.the.ISW11SC
●
Please back up*
1
important content recorded or downloaded to the
ISW11SC to an outside source. Content recorded to memory on
the ISW11SC sometimes disappears or is altered by unexpected
factors, such as static electricity or a fault, repair, mishandling, etc.
*1 How to make backups:
Store important data such as phonebook data, music, shot photos and videos
on microSD memory cards. You can also send files as mail attachment or
transfer to your PC. Note, however, that there are some data that cannot be
copied by using these means.
Available security codes
The ISW11SC has various security codes that you can use.
The available security codes are as follows. Do not forget the
various security codes that are set as they are necessary for
various operations and contracts.
● Security code
Example of
usage
①
To do remote operation of Voice mail and Call
forwarding services from a landline phone
②
To use Customer Service Center and to do various
inquiries, applications, and modifications on the au
homepage
Initial value
A four-digit number chosen by the customer and noted
on the application form
● Pattern/PIN/password to unlock screen
Example of
usage
To set and release the screen lock
Initial value
None
● PIN code
Example of
usage
To prevent unauthorized use of the au IC-card by third
parties
Initial value
1234
● NFC lock number
Example of
usage
To set/cancel NFC lock
Initial value
1234
PIN Code
■ PIN1 Code
You can set the ISW11SC to require PIN1 code entry every
time the power is turned on, to prevent unauthorized use of
the au IC-Card by a third party.
If the PIN code is incorrectly entered three times
consecutively, the PIN code will be locked. Use the PUK
code to unlock the PIN code.
• PIN1 code is "1234" and PIN1 code entry is set to not be
required at the time of purchase. You can change PIN1
code to any four- to eight-digit number, and set PIN1 code
entry to be required as necessary.
