Get
ting R
ead
y
Charging
When you purchase your product, the battery pack is not
fully charged. Make sure to charge the battery pack before
use. When the charging light in red turns off, charging is
complete.
◎
The product may become warm while charging, depending
on the situation, but this is not abnormal.
◎
Charging while using camera etc. may take longer.
◎
For handling the battery pack, thoroughly read "Safety
Precautions" (
▶
P. 61) for proper use.
◎
Turning on the flashlight while charging causes charging to
stop. Turning off the flashlight allows charging to start
again.
◎
When you operate the product with the specified charger
connected, the product may repeat short-time charging/
discharging resulting in short battery life.
◎
When temperature of environment or the product becomes
extremely high or low, charging may be stopped. Try to
charge the battery as far as possible at room temperature.
◎
If the charging light blinks in red, check if the battery pack
is correctly attached or connected. Even if the light keeps
blinking, stop charging and then contact an au shop or
Keitai Guarantee Service Center.
◎
If charging is stopped while the charging light is still turned
on, the battery may not be fully charged even with "
"
(Full) displayed. In that case, available time will be short.
◎
Do not allow conductive foreign objects (metal fragments,
pencil leads, etc.) to come into contact with or get inside
the connection terminals.
Charging with specified AC Adapter
(sold separately)/DC Adapter (sold
separately)
Charging with Common AC Adapter 05 (sold separately)/
Common DC Adapter 03 (sold separately) is explained. For
information on the specified Common AC Adapter (sold
separately)/Common DC Adapter (sold separately), see
"Introduction of related accessories" (
▶
P. 95).
19
