User manual
– SYSTOE
14 168
Rev. G
Page 21/38
9.2.2 Birth date
Enter patient birth date (DD/MM/YYYY)
with the numeric pad
Selection of the figure
that must be modified
RET.: Save and go back to patient file
9.2.3 Sex
Select the patient sex with the
Alphanumeric pad
RET.: Save and go back to patient file
9.3
Archive
To review the saved measurements and select the Export mode.
From the main configuration menu, select “Archive” (2).
9.3.1 Display the archive list and open an archive
This is the number of the archive.
:
List scrolling up
: List scrolling down
RET.: Go back to previous menu
: Open an archive for re-visualization
(see §9.3.2)
0:
Delete current examination
0+0: Delete all examinations
The
SysToe
can store up to 32 examinations.
The archive number is from 1 to 32.
For each archive position, the backup status is displayed:
If no examination is saved at current archive position, the label
“NONE” is displayed.
If an examination is saved at current archive position, the name of
the patient is displayed.
If the current examination has been deleted:
o
when the selecte
d export mode is “export not needed”, the
examination is not fully deleted
the label
“DELETED” is displayed
but the current examination cannot be replaced.
o
when
the selected export mode is “export needed”: the examination
is fully deleted
the label
“NONE” is displayed, current archive
location can be used.
