manualshive.com logo in svg

ATX XDS-PRO Series, Руководство пользователя

Поделиться
Скачать
ATX XDS-PRO Series Скачать руководство пользователя страница 38

5-8 

XDS-PRO (PRO1R, PRO4R & PRO1S, PRO4S) Satellite Receivers - User Guide  Rev. A  R830001-2106

 

AFFILIATE WEB INTERFACE

ATX 

Confi dential & Proprietary

Figure 34: Editing Relay Mappings

• 

Click inside the corresponding relay you wish to change.  Clicking inside a cell will expand it automatically and allow 

you to edit its contents. 

• 

When done changing relays, press “Save”.

• 

To cancel the changes you have made and to go back to the previous relay mapping, click “Cancel”.

Note: Net relays entered into the NMS’s relay-mappings text box bust be upper-case alphanumeric, 

i.e. only upper-case letters, or numbers.

5.4  Checking Receiver Health

The Affi liate website is capable of displaying the receiver’s health status. To view this, navigate to the Health tab located on 

the top of the webpage. Clicking on this tab will display the health status, station mappings, receiver code version, uptime, Eb/

Ag, and Last Report Date. 

Figure 35: Receiver Health Page

CHAPTER  5:     

Содержание XDS-PRO Series



























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды