ATX Ucrypt IP2IP, Быстрый старт

Страница: 8 / 30

2-2 MDU Solutions
®
– UCrypt
®
IP to IP – Quick Start Guide
CHAPTER 2: QUICK START GUIDE – READ ME FIRST
2.6 Select Programs for Processing
You first need to define the incoming multicast addresses and Ports which contain the programs that you want on the UCrypt
device output. Enter the IP address(es) and associated Port number(s), click Save then click the Detect Programs button to
read the Transport Stream(TS) PAT and PMT Tables. Only programs that are in the clear on the input may be selected to be
processed by the UCrypt device. Each program on each multicast will have an accompanying drop down dialog box with 3
options:
• Filter
Program is ignored by UCrypt device and not passed to the output.
• Passthrough to Output
Program is passed to the output without encryption applied.
• To Pro:I Encryptor
Program is encrypted with Pro:Idiom before being sent to output.
Refer to “8. INPUT ETHERNET VIEW Tab - Configuration” on page 8-1 for a summary of steps to select programs.
2.7 Configure Output Multiplexes
You need to specify the IP Address of the output multiplexes.
Refer to
“9. OUTPUT MPTS VIEW Tab - Configuration” on page 9-1 for more details.
2.8 Assign Programs to Output Multiplexes
Finally, the programs selected on the Input Ethernet View tab are assigned to output multiplexes. Pro:Idiom encryption is
automatically done if the program was selected with the “To Pro:I Encryptor” routing. You may combine encrypted and non-
encrypted programs in the same output multiplex. Depending on the model of UCrypt device ordered, you may either build
SPTS or MPTS multiplexes. The MPTS model may also be used to build SPTS multiplexes.
Refer to
“9. OUTPUT MPTS VIEW Tab - Configuration” on page 9-1 to assign selected programs to output IP multiplexes.
That’s it, you’re done
If you followed all the Read Me First directions, you should have programs on the IP output channels that you configured. Use
an IPTV or computer with media player such as VideoLAN to view programs that are in the clear and an appropriate Pro:Idiom
compatible TV or STB with built-in Pro:Idiom to view encrypted programs. Download the full Installation & Operation Manual
from the ATX website (atxnetworks.com) in the Resources & Support section, User Documents sub-section for more details
than are presented here. Click the Help tab to download it to your Management Computer.