ATV VD650WDR, Инструкция по эксплуатации, Страница: 10 / 18

10

excessive lighting compensation is performed when the weighting on the
high-brightness side is increased.
4) Auto(Auto Weighting BLC) : Auto weighting BLC on.
5) Spot(User Setting BLC area) : Spot metering mode on.

Posi : OSD mode to adjust the position of the spot metering area.

Size : OSD mode to adjust the size of the spot metering area.
6) Zone(Preset BLC area) : Fixed metering area mode. (1-9).
<Mask>
1) Mask: Select mask area(1-15).
2) Func : Select mask function.(Privacy, BLM, Both, Off).

Privacy : Area to screen on the display.

BLM : Back Light Mask.

Selected BL Mask area that will be except of the auto exposure

If there is a high light installed in a limited environment such as an
apartment parking garage or gas station entrance, removing the high light
makes it possible to view car license plates efficiently.

Both : Privacy function and BLM function on.

Off : Function off.
3) Edit : Mask area edit.

Edit mode take effect during Func not Off.

Size : adjust the size of the Privacy and BLM mask area.

Posi : adjust the position of the Privacy and BLM mask area.

Tilt : adjust tilting of Privacy and BLM mask area.

Color: Select Privacy and BLM mask (0-14).

Transparency: Select Privacy mask transparency (Default 3/0-3).

Mosaic: Select Privacy and BLM mask mosaic On/Off

Adj. Mosaic: Adjust Privacy and BLM mask mosaic level (0-31).
<Detection>

Func : Detection function selection.

Sens Down : Adjust to Motion Sensitivity using left/right Buttons.
1) OFF : Detection function off.
2) Zone : Area motion detection mode.

Zone : Select Motion detection zone (Zone1-4).

Func : Select Motion detection on/off.

Size : Press Enter button to adjust the size of the Motion detection area.

Posi : Press Enter button to adjust the position of the Motion detection area.

Link Zoom : Select Motion detection with D-PTZ function that On/Off .

When the motion triggered in the area, move to the area with D-PTZ.
3) Motion Trace : Motion trace mode on.

Tracks an object through a scene and generates an alarm.
4) Face Trace : Face Trace mode on.

Tracks face through a scene and generates an alarm.

Sens Down : lower value is more widen the scope to judge face. (0~127)

Min Size : Minimum face size configuration (0 : minimum face size is to none)