QSP-860MPX: Instructions for Basic Operation and Installation
Page 11
Display Sequencing Format
A unique feature of the QSP-860MPX is the option to
customize the display sequence format to suit your
application. You can program a specific selection of
cameras for sequencing.
Selecting:
1. Enters edit mode for dwell time.
2. Enters “Full Camera Call Up” format menu.
3. Enters “Quad” format menu.
4. Enters “PIP” format menu.
5. Enters “Dual PIP” menu.
6. Enters “Split Screen/Squish Screen” format
menu.
Note that any changed camera display sequence will not be applied until the display sequencing mode
is activated by the front panel button.
Sequencing Format Screens
The above screens show the factory default values. The most commonly used sequencing is the full
frame or dual page quad formats as shown above. You can customize any or all formats, and may
have more than one section of a multi-camera display defined for sequencing. For any particular
camera display, cameras are sequenced in ascending numerical order and cameras cannot be
repeated. For example, if the pattern “7,5,2,4,5,5,7” were entered, the software will translate this
to “. 2 . 4 5 . 7 .“.
Display Sequence Set Up
1: Hold Each Image
for: 3 Sec.
2: Full Camera Call Up . . .
3: Quad . . .
4: PIP . . .
5: Dual PIP . . .
6: Split/Squish Screen . . .
PIP: Restore Default Settings
Camera: Select/Change
DISPLAY: Previous Menu
Quad Display Sequence
1: Upper Left: 1 . . . 5 . . .
2: Upper Right: . 2 . . . 6 . .
3: Lower Left: . . 3 . . . 7 .
4: Lower Right: . . . 4 . . . 8
Enter Cameras you want
displayed in the sequence
Camera: Select/Change
DISPLAY: Previous Menu
Full Camera Display Sequence
1: Cameras: 1 2 3 4 5 6 7 8
Enter Cameras you want
displayed in the sequence
Camera: Select/Change
DISPLAY: Previous Menu
PIP Display Sequence
1: Background: As is
2: Insert: 1 2 3 4 5 6 7 8
Enter Cameras you want
displayed in the sequence
Camera: Select/Change
DISPLAY: Previous Menu
Dual PIP Display Sequence
1: Background: As is
2: Insert 1: 1 2 3 4 5 6 7 8
3: Insert 2: As is
Enter Cameras you want
displayed in the sequence
Camera: Select/Change
DISPLAY: Previous Menu
Split/Squish Display Sequence
1: Left: As is
2: Right: 1 2 3 4 5 6 7 8
Enter Cameras you want
displayed in the sequence
Camera: Select/Change
DISPLAY: Previous Menu