67
–
Obtain DNS Server via DHCP:
Automatically use the DNS server settings pro- vided
by the DHCP server.
–
Use the following DNS server address
to enter the desired DNS server by specifying
the following:
·
Domain name:
Enter the domain(s) to search for the host name used by the
network camera. Multiple domains can be separated by semicolons (;).
The host name is always the first part of a Fully Qualified Domain Name, for
example, myserver is the host name in the Fully Qualified Domain Name
myserver.mycompany.com where mycompany.com is the Domain name.
·
DNS servers:
Enter the IP addresses of the primary and secondary DNS
servers.
•
Host Name Configuration
–
Host Name:
Enter the host name to be used as device information in the client
software or SmartManager.
•
Services
–
HTTP port:
Enter a port to receive a service through the HTTP. Default port
number is
“80”.
–
HTTPS port:
Enter a port to receive a service through the HTTPS. Default port number
is
“443”.
–
RTSP port:
Enter a port to receive a service through the RTSP. Default port
number is
“554”.
•
Link Speed Control
–
LAN Interface:
Select the transmission method: Auto/Half-Duplex/Full-Duplex.
–
Link Speed:
User can select either 10Mbps or 100Mbps.
When the settings are complete, click
Save
button to save the settings, or click
Reset
button to clear
all of the information you entered without saving it.
Содержание NVW4212M
Страница 88: ...VP DOME NETWORK CAMERA Rev A ...