43
To ensure that the login procedure is performed as securely as possible when using
SMTP authentication, you must define the weakest authentication method allowed.
-. Login Method - Set the Weakest method allowed to the highest/safest method
supported by the mail server. The most secure method is listed in the drop-down list:
Login / Plain
•
SMTP(E-Mail) Receiver
-. Receiver - Enter an email address. You can also register the e-mail address of
recipients up to 8.
•
SMTP(E-Mail) Test
-. Receiver - Enter an email address and click the Test button to test that the mail servers
are functioning and that the email address is valid.
▼
FTP & JPEG
When the network camera detects an event, it can record and save images to an FTP
server. Images can be sent as e-mail attachments. Check the box to enable the service.
• FTP Setting
-. Server - Enter the server's IP address or host name. Note that a DNS server must be
specified in the TCP/IP network settings if using a host name.
-. Port - Enter the port number used by the FTP server. The default is 21.
-. Use passive mode - Under normal circumstances the Network Camera simply requests
the target FTP server to open the data connection. Checking this box issues a PASV
command to the FTP server and establishes a passive FTP connection; whereby the
Network Camera actively initiates both the FTP control and data connections to the target
server. This is normally desirable if there is a firewall between the camera and the target
FTP server.