ATV IPC560TDN Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 77

ATV IPC560TDN Скачать руководство пользователя страница 31

31

-. Sound bitrate

Depending on the selected encoding, set the desired audio quality (bitrate). The settings
affect the available bandwidth and the required audio quality.

• Audio Input

Audio from an external line source

can be connected to the terminal I/O of the network

camera.

-. Input volume

If there are problems with the sound input being too low or high, it is possible to adjust
the input gain for the microphone attached to the network camera.

• Audio Output

-. Enable full duplex

Check the box to enable Full Duplex mode. It means that you can transmit and receive

audio (talk and listen) at the same time, without having to use any of the controls. This is
just like having a telephone conversation.

This mode requires that the client PC has a sound card with support for full-duplex audio.

Uncheck the box enable Simplex mode. The simplex

mode only transmits audio from the

network camera to any web client. It does not receive audio from other web clients.

-. Output volume

If the sound from the speaker is too low or high it is possible to adjust the output gain

for

the active speaker attached to the network camera.

When satisfied with the settings, click

Save

, or click

Reset

to revert to previously saved

settings.

«
...
29
30
31
32
33
...
»

Содержание IPC560TDN














































































Отзывы:

Нет отзывов