ATV FD540VA, Инструкция по эксплуатации

Страница: 6 / 12

I 2 I
THREE AXIS DOME CAMERA
D. Service jack cable with BNC connector
BASE INSTALLATION
Housing Ass'y Liner
Bubble
Fig. 1
Tapping screw
M2.6 x 5.0
Fig. 3
Torx screws
M6 x 3.5 (3x)
Wall / Ceiling
Plastic Anchors (3x)
Rubber Grommet
Fig. 2
CAUTION :
When installing the camera, the following instructions must be
followed closely.
PACKAGE INSIDE
1. Loosen the bubble( ), the liner( ). (Fig. 1)
2. Drill three holes for the plastic anchors( ) using the bottom of the housing ( )
as a template, insert the plastic anchors( ) into the holes, attach the housing( )
to the plastic anchors( ) using the mounting screws( ). (Fig. 2)
3. Rest the liner( ) on a groove of the housing( ). (Fig. 3)
4. Fasten the bubble( ) to the housing( ).
5. Fasten the set screw( ) tightly.
6. Take off the protective nylon.
Note: Plastic anchors is not supplied.