ATTO Technology iPBridge 2600, Инструкция по установке и эксплуатации

Страница: 21 / 50

16
6 From the drop-down box next to each trap
address, select the level of severity for which
you want each address to be notified:
None , All ,
Critical or Warning .
7 Click on Submit.
8 Go to the Restart page and restart the iPBridge.
After rebooting, the iPBridge sends notifications
as you set them up.
Email notification
Email notification allows the iPBridge to send an
Email message to you, a network administrator or
other users when certain events occur with the
iPBridge. Serious error messages are sent
immediately, while messages for less serious
errors are sent every 15 minutes.
You may send Emails to up to five Email
addresses and designate which conditions prompt
each Email notification.
For example, a recipient with a critical severity
level only receives critical messages and not
warning or informational messages.
When an event occurs that warrants Email
notification, the iPBridge sends the message; it
cannot respond to a rejection by a server for an
invalid address. Ensure all Email addresses typed
in are valid.
1 Follow the Preliminary steps on page 13.
2 Click on Remote Mgt from the side menu. The
Remote Management page appears
3 Click on the Enabled button for Email
Notification
4 Type in the sender address (Emails show this
name in the From field)
5 Type in the SMTP Server IP Address
6 Type in the user name and password of your
SMTP Email account
7 Type in up to five Email addresses
8 From the drop-down box, choose
None , All ,
Critical or Warning for each Email address.
9 Click on Submit.
10 Go to the Restart page and restart the
iPBridge. After rebooting, the iPBridge sends
notifications as you set them up.