ATS PAV3, Инструкция по эксплуатации, Страница: 8 / 55

8
2.4 Cautions
The following statements are caution statements. These
statements alert the operator to conditions that may damage
equipment. Operators must be aware of these conditions in order
to ensure safe operation of this equipment.
CAUTION: Installation of electrical devices must be
accomplished by competent personnel and done in
accordance with any current local and national codes.
CAUTION: The PAV must be grounded and wired in
accordance with national and local electrical code
requirements.
CAUTION: Before energizing the electrical power to the
Pressure Aging Vessel, place all controls in an OFF
position.
CAUTION: Do not exceed the maximum operating
temperature. Refer to the specifications in Section 3 of
this manual.
CAUTION: Closing the flow adjust valve when the PAV is
in operation will cause damage to the valve.
CAUTION: All supporting and contacting surfaces must be
non-flammable. Do not allow flammable materials to
contact the shell.
CAUTION: If an emergency shutdown needs to be
performed, place ON/OFF switch in an OFF position. Unit
will depressurize automatically within 10-15 minutes.
CAUTION: Do not overflow PAV pans. Refer to test
specifications for proper amount of material.