ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 90 / 214

3-36 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
ATS Setup Mode Chapter 3: Monochrome Terminals
The Delete FP Templates command, added in Firmware 2.05.08(X), gives you the ability to
erase all saved biometric templates via the terminal Setup Menu. This command only appears
if your terminal is equipped with a FPR biometric device (“Finger Print Reader”).
1. When the terminal displays the Delete FP Templates parameter press the
enter key to access the parameter or press the clear key to proceed without
deleting the templates.
2. The terminal prompts you if you want to proceed ( ERASE TEMPLATES! ). Press
the enter key to proceed or press the clear key to return to the Delete FP
Templates parameter.
3. If you pressed the enter key the terminal prompts you to confirm the Erase
Templates command. Press the enter key to permanently delete all saved
(enrolled) fingerscan templates from the biometric reader and reboot the
terminal (or press the
clear key to return to the Delete FP Templates
parameter.)
4. If you pressed enter at the Confirm prompt the terminal erases all saved
biometric templates and reboots.
Executing the Delete FP Templates command reboots the terminal.
NOTE:
ATS Setup Mode
Delete FP Templates
ERASE TEMPLATES!
[Enter] to Proceed
ERASE TEMPLATES!
[Enter] to Confirm