ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 81 / 214

Chapter 3: Monochrome Terminals ATS Setup Mode
MANU-MAXIMUS-02 Maximus Reference Manual 3-27
Revision-02
4. Next the terminal displays the Set Auto Answer parameter. This parameter
allows you to set the terminal to either None (immediate answer), or to answer
after 1 Ring, 2 Rings, or 3 Rings. Press the
enter key to accept (set) the displayed
value and continue or press the clear key to change the setting. When you are
finished press the enter key and the terminal returns to the Setup Password
prompt (start of the ATS Setup Menu ).
Setup Smartcard
The Setup Smartcard parameter enables you to define the storage capacity of an optional
Mifare
TM
or iClass
®
contactless smartcard reader installed in the terminal (if applicable/
installed).
1. When the terminal displays the Setup Smartcard parameter (typically after the
Setup Host Connect parameter) press the enter key to access the Setup
Smartcard options (or press the clear key to proceed to the next parameter).
2. Press the clear key to scroll between the 1k Card , 4k Card , and Disabled
(default setting) options. Press the enter key when the terminal displays the
desired setting to select the option and proceed to the next menu item.
Set Auto Answer
None
ATS Setup Mode
Setup Smartcard
Setup Smartcard
Device: Disable