ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 71 / 214

Chapter 3: Monochrome Terminals ATS Setup Mode
MANU-MAXIMUS-02 Maximus Reference Manual 3-17
Revision-02
2. If you pressed the enter key at the Re-Boot prompt the terminal prompts you
to confirm the re-boot. Press the enter key to confirm and re-boot the terminal
or press the clear key to return to the Re-Boot prompt.
Setup Password
The Setup Password parameter enables you to create a password to restrict access to the
terminal parameters (e.g., initial setup, TSD Mode, Setup Mode).
1. After you press the clear key at the Re-Boot prompt ( page 3-16 ) the terminal
displays the Setup Password parameter. Press the clear key to continue to the
Setup Host Connection ( page 3-18 ) or press the enter key to set a (new)
password.
2. If you pressed the enter key the terminal displays the Enter New Password
prompt. Use the numeric keys to enter a new, up to 7-digit, password for the
terminal then press the
enter key.
Re-Boot Terminal
[Enter] to Confirm
ATS Setup Mode
Setup Password
Enter New Password