ATS Maximus MCJ2000 Series, Справочное руководство

Страница: 59 / 214

Chapter 3: Monochrome Terminals Initial Setup
MANU-MAXIMUS-02 Maximus Reference Manual 3-5
Revision-02
Initial Setup
To enter configuration mode, press and hold both the clear and enter keys simultaneously for
about five seconds. If the terminal prompts you to enter a password, type in the password
using the numeric keys then press the
enter key. The Initial Setup parameters appear starting
with Setup Host IP .
Initial Setup Menu Navigation
The terminal will display the saved or default values for the terminal IP connectivity options. In
general, press the
enter key to accept the displayed value and go to the next option or press
the clear key to change the value.
Figure 3-2 provides a flow-chart of the Initial Setup Menu structure.
At any point in the configuration menus you can press and hold both the clear and enter
keys simultaneously to return to the start of the "Initial Setup Parameters" on page 3-7 .
NOTE:
If you type an invalid IP, subnet mask, or other value, the terminal reports the error and
returns to the previous value (the default value or the previously saved value).
NOTE: