ATS Maximus MCJ2000 Series, Справочное руководство, Страница: 142 / 214

4-26 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
Setup Mode Chapter 4: Color Terminals
Figure 4-21 TCP/IP Setup – Dynamic Mode
Use the following procedure to configure the Dynamic Mode Ethernet settings:
1. Press the “F3” key to select the DHCP Option Code parameter. At the Enter
the DHCP Option Code prompt screen, use the numeric keys to type an option
code then press the enter key (You can press the “ clear ” key to delete a
number).
The DHCP Option Code allows for customizable configurations beyond the
standard DHCP options. Different option codes could be used to provide
information to and from the terminal, provided the terminal is programmed to
use the information and the DHCP server is configured to transmit the
information.
• Options 1–127 are reserved for definition by the Internet Assigned
Numbers Authority (IANA) for public standardization. Some are used and
some are not. For example, option 117 specifies the order in which name
services should be consulted when resolving host name and other
information.
• Options in the range of 128–254 are user configurable and have no
standard definition. For example, the terminal supports a list of up to five
additional hosts that can be specified using the UCS command ENETHOST.
• Alternatively, the terminal could send the DHCP server a DHCP request with
option code 128, and if the server were configured appropriately, the server
would respond with a list of hosts for the terminal to connect to.
Static Mode Settings
In static mode, the IP address of the terminal is entered at the terminal and does not change
unless changed at the terminal. The center of the display shows the current socket port.
03:38:15
Friday
Nov 7, 2014
TCP/IP
Client
Dynamic
DHCP
DHCP
Option
Code
Return
To
Setup
Socket
Port
Append
EOT
No
PPP
Disabled
Setup
WiFi
DHCP OptionCode XXX
Clk XXXXXXXXX
WiFi XXXXXXX
Socket Port XXXX