13 12.22.2016
3.
Observe where the set of holes on the VHF antenna end of the main collar line up with
the holes on the other end of the main collar such as to maintain a desired tension level
on the animal’s neck.
4.
Place the collar attachment bracket through both sets of holes and through the brass
bracket and tighten the collar adjustment bracket nuts using the provided nut driver. Do
not over-tighten as this may damage the collar adjustment bracket.
5.
Finally ensure that the case nuts have been tightened before releasing the animal.
Section 6 Downloading Data from the G2110E2
Once GPS position data has been stored in the G2110E2 memory, e.g. after testing or field
retrieval, it can be downloaded to your computer. Data is grouped into two categories: originally
programmed schedule data and email adjusted schedule data. You may only download one group
of data at a time. Note that during data download, the VHF transmitter will be silent even if it
was scheduled to beep.
Steps for Downloading Data
1.
Connect the ATS Wildlink module to a USB port on the PC.
2.
Open the ATS
Fixes
for Satellite Collars Programming Software.
3.
Select the correct Product Model (Iridium G2110E2).
4.
Select the appropriate COM port. See Section 3 to determine the correct COM port, if
necessary.
5.
Click the Download Data button.
6.
Choose between Degrees, Decimal Minutes and Decimal Degrees for the data format of
the GPS data.
7.
Choose between originally programmed schedule data and email adjusted schedule data.
8.
Click the Continue button.
9.
Touch the magnet to the G2110E2 to initiate communication.