USER MANUAL Rev 1 April 2017
Omega Implant
Page 11 of 16
ATS DENTAL srl – 51030 Serravalle Pistoiese – Italy – www.atsdental.it
11.Maintenance
The micro motor cable has limited durability and is considered a consumable product. The durability of the cable is largely dependent
upon use and treatment, i.e., handling, reprocessing and frequency of use.
Caution must be exercised when connecting or disconnecting the micro motor and foot control cable from the device to avoid damage
to the cable.
Periodically inspect the micro motor cord for damage prior to use. If there is damage noted, contact the Manufacturer.
LUBRICATING:
-
Do not oil or lubricate the micro motor.
RUBBER O-RING:
-
If necessary, substitute. Contact the Manufacturer
1.Do not attempt to disassemble the motor or motor connector.
2.Do not oil or lubricate the motor.
3. Do not attach a hand piece to the motor while the motor is running.
4.Do not bend motor cord sharply.
-
The Micro motor is sensitive to shock. Do not drop or impact micro motor against hard surface
Failure to comply with any of the above instructions may void your warranty
12.TECHNICAL DATA
Manufacturer
ATS Dental – Pistoia – Italy
Nominal Power
100 VA
Model
OMEGA IMPLANT
Frequency
50/60 Hz
Dimensions
185x160x100
Protection
Class 1
Materials
ABS
Type
BF
Micro motor
Brushless 40000/30000
Class MD
IIa rule 9 in Annex IX 93/42/EEC
Noise
< 65 dBA
Console
IP21
Supply Voltage
24-30 VDC
Micro motor
and Pedals
IP21
Not suitable for use in presence of flammable anesthetics or oxygen.
Conditions of use: Temp +18°C/+40°C (+64°F/+140°F) RH < 80%
Shipping and Storage conditions: Temp +5°C/+65°C (+41°F/+149°F) RH < 20-95% non condensing.
Life of the device: When used as prescribed = 5 years. No warranty claim may be made in the event that the failure happen sooner
or later than indicated, because of the frequency of use, sterilization and maintenance.