ATOS Worldline
-
Technologies & Products
Page:
21/55
DEP/T6 Owner's Manual
(
04.01
)
Classification:
Public
Backlight Power Saving
1
Enable
2
Disable
3 Up
Ok
4.
Navigate to the desired option and press
Ok
to select it.
5.
Return to the level above using the
Up
function.
To set the inactivity timer for the backlight power saving feature proceed as follows:
1.
Open the
Hardware Setting
menu.
The path to follow is:
System Management
> (
Identification
)
System
Configuration
>
Hardware Setting
2.
Select the function
LCD Setup.
.
3.
Select th
e function
Backlight Pwr Sav Time.
The
LCD Setup Backlight Pwr Sav Time
input screen appears.
LCD Setup
Backlight Pwr Sav Time
060 sec
Ok
4.
Adjust the value in the input spin box to the desired number of seconds. This
value must be in the range 05 to 60 seconds.
5.
Press
Ok
to validate the new setting.
3.
INSTALLING THE
DEP
/T6
3.1.
P
REPARING THE INSTALLATION
3.1.1.
Dimensions
The dimensions of the DEP
/
T6 (D x W) are 430 m x 480 mm, fitting perfectly into a
19" rack. Its height of 88 mm corresponds to two rack units.
3.1.2.
Required tools and parts
Your DEP
/
T6 chassis has been fully assembled at the factory; no assembly is required
for standard rack mounting.
