SW5501 – SW5502
Wireless Serial Server
User Manual
Configuration and
setup
After finish configuring the
Management List
, please click on
Save & Apply
button to keep the change that you
have made and to apply your setting
.
A pop
-
up window with message
“
Please wait for a while
…”
will be displayed
.
When the saving is finished, the pop
-
up window will disappear and the web browser will remain on the
Management
List
page
.
If you want to cancel the change and reset all changes back to their original values, just click the
Cancel
button
.
4.9.6
Ping
The Web UI of SW550X has an interface to call Ping, which is a network diagnostic utility for testing reachability
.
You can use the Ping function to determine whether SW550X can reach the gateway or other devices in the network
.
To use the Ping, enter a destination IP address in the text box behind the Ping To and click Start button as shown
in Figure 3
.
49
.
This process usually takes around 20 seconds
.
The two figure below represent a successful ping
without packet loss from SW550X to the address 10
.
0
.
50
.
201 and back,
and the connecting device at the address
10
.
0
.
50
.
202 is unreachable in which no packets have returned from the transmitted ping packets
.
Figure 4.48
Successful Ping with No Packet Loss
Figure 4.49
Unsuccessful Ping with 100
%
Packet Loss
