Atop MB5400, Руководство пользователя

Страница: 38 / 88

Atop Modbus Gateway
MB5400 Series
User’s Manual V 1.3
38
3.8 Advanced Settings
3.8.1 SNMP Settings
SNMP (Simple Network Management Protocol) Settings determines whether your device
settings can be viewed with standard SNMP software. By default, it is disabled. Fig. 3.21 shows
the SNMP Settings page.

SysName, which is by default, is the MAC address of the Modbus Gateway.

SysLocation
refers to the device’s physical location.

SysContact
is the device administrator’s contact information.
If you wish to make the information available for public viewing by an SNMP Read Community
string (a user ID or password), simply check the
“Enable SNMP”
box and fill in
“Public_viewers”
or your desired password string (the default string is
“public”
) in the Read
Community field. If you wish to allow a group of people called
“Power_users”
to change the
information, enter
“Power_users”
or your desired password string (the default string is
“private”
) in the Write Community field . If you allow a trap server to collect device information,
please fill in SNMP Trap Server with its corresponding IP address (a trap server is designed to
collect all alarm information from the Modbus Gateway). After finishing configuring the SNMP
Settings, please click on Save Configuration button to keep all changes that you have made.
Note that configuration will take effect after the device is restarted by clicking on the restart link
as shown in Fig. 3.10.
After a successful device’s restart, the web browser will be redirected to
the Overview page as shown in Fig. 3.7.