![ATON CLT300 Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/aton/clt300/clt300_user-manual_3004726047.webp)
45
Handset settings
Aton CLT300 - Gig S455 / swisscom-en / Internet / registr_sett.fm / 23.04.2007
External number:
select number from
the directory or enter directly. Only
the
last 4 digits
are displayed.
Internal number:
delete any stored
external number.
§INT§
s
(select hand-
set or
Call All
, if all registered handsets
are to be called)
§OK§
.
Store number with
§Save§
.
Level:
Set noise level sensitivity (
Low
or
High
).
¤
Save changes (page 56).
The function is now activated. With
v
,
you can move directly to settings.
Changing previously set external
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
X
Delete existing number.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 44).
¤
Save changes (page 56).
Changing previously set internal
destination number
v
¢
í
¢
Room Monitor
s
Scroll to the
Call to:
line.
§Edit§
Press the display key.
§Yes§
Press the display key to con-
firm the prompt.
¤
Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 44).
¤
Save changes (page 56).
Deactivating the room monitor
remotely
Important
: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤
Take the call from the room monitor
and press keys
9
;
.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
§OFF§
on the hand-
set.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
(page 44) with
§Save§
.
Handset settings
Your handset is preconfigured, but you
can change these settings to suit your
individual requirements.
Changing the display language
You can view the display texts in different
languages.
v
¢
Ð
¢
Handset
¢
Language
The current language is indicated by .
s
Select a language and
press
§OK§
.
a
Press and
hold
(idle status).
If you accidentally choose a language you
do not understand:
v 5 41
Press keys one after the other.
s
Select the correct language
and press
§OK§
.
Setting the display
You have a choice of four colour schemes
and several different contrasts.
v
¢
Ð
¢
Display
Colour Scheme
Select and press
§OK§
.
‰