Installation
Read instructions and check you have all the tools and accessories to
complete the installation correctly.
1. Isolate the mains power supply before commencing installation.
2. Cut
100
mm x 62mm hole in desired position.
3. Feed mains cable through cut-out and plug into mains supply.
4. Connect fitting to LED driver.
5. Ensure wall light is pressed carefully into the aperature.
6. Restore mains power.
This product may contain substances that can be hazardous to the environment if not disposed of properly. Electrical
and electronic equipment should never be disposed of with general household waste but must be separated of its correct
treatment and recovery. Where possible recycle your packaging. Please keep these instructions safe for future reference.
SAFETY INFORMATION
• Luminaires must be installed and fitted by a qualified
electrician ensuring the installation complies to the current
wiring regulations.
• Ensure all electrical connections are secure and that there are
no loose strands.
• Do not install this product on damp or newly plastered walls.
• Always ensure there is adequate ventilation around the driver
at all times.
Product Specification
Voltage
220-240V~ 50/60Hz
Power Consumption
3W
Light Colour Options
Warm White (WW)
Cool White (CW)
Lumen Output
185lm
190lm
Colour Temperature
3000K
4000K
Colour Rendering Index
>80
Beam Angle
100°
Dimmable
No
Warranty
3 Years
Working Temperature
-10°C – 45°C
IP Rating
(Front face only)
IP44
Electrical Classification
Class II
3W LED Rectangular recessed step light.
INSTALLATION SHEET
LED STEP LIGHT
AT9501
1
2
Isolate mains power.
Cut hole in desired
position.
Feed cables through
cut-out and plug into
mains supply.
3
Product Range
Atom Code
Finish
Colour Temp.
AT9501/SC/CW/C
Satin Chrome/Clear Lens
Cool White
AT9501/SC/CW/O
Satin Chrome/Opal Lens
Cool White
AT9501/SC/WW/C
Satin Chrome/Clear Lens
Warm White
AT9501/SC/WW/O
Satin Chrome/Opal Lens
Warm White
AT9501/WH/CW/C
White/Clear Lens
Cool White
AT9501/WH/CW/O
White/Opal Lens
Cool White
AT9501/WH/WW/C
White/Clear Lens
Warm White
AT9501/WH/WW/O
White/Opal Lens
Warm White
70mm
Cut out 100 x 62mm
25.6mm
110mm
96mm
Connect fitting to LED
driver.
A
4