3
operATion
• Take the monocular out of the case.
• Install the battery into the housing with the polarity order
as shown on the scope. Battery Type: 1.5 Volt, AA size .
• Rotate the operation knob from “OFF” position to “ON”
position to turn the unit on. The protective lens cover shall
be attached to the lens.
Do not turn the unit on in day-
time without the protective lens cap on.
You should see
green glow in the eyepiece.
• Observe the scene and adjust the diopter for optimal im-
age clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter. Adjust the front lens focusing. You should not have
to readjust the diopter. Remember that focusing range starts from 0.24m.
• To turn the unit off, rotate the operation knob from “ON” to “OFF” position.
focsing
To focus the PS-14 first you will need to adjust the diopter. Simply turn the diopter clockwise
until it stops. Then, while looking through the diopter at an object, slowly turn the diopter back
counter clockwise until the grain on the image becomes sharp.
NOTE:
We suggest that you focus the diopter during daylight with the filter on.
Next focus the front lens until the image and the grain become both sharp. When you are in
low-light conditions and the daylight filter is off, you may focus the front lens to receive sharp
image, the diopter should not be adjusted.
NOTE:
The front lens should be readjusted as you view objects at different distances.
BilT-in infrA-red illminATor
Infra-red illuminators, or IR illuminators, are common to
night vision. The IR light greatly enhances the perform-
ance of the PS-14 while remaining almost invisible to a
naked eye.
To turn the built-in IR on, draw and rotate the operation
knob to “IR” position.
It is important to remember that the IR illuminator
is simply an infra-red light source, and like any light
source, it may loose its effectiveness over a great dis-
tance.
Built-in
Infra-red
Illuminator
Operation
knob
