Atmos Cam 21, Руководство по эксплуатации

Страница: 9 / 40

9 Setting up and starting up
3.0 Setting up and starting up
3.1 Scope of delivery
ATMOS ® Cam 21
DV
Cam 31 Cam 31
DV
Cam 31 DV
Data
Camera housing
   
Holder for camera head
   
Camera head
   
Foot switch for image storage
  
Data transfer cable

Audio cable
for stroboscope audio
channel incl. adapter plug

S-Video cable
   
Cable
and adapter HDMI
to
DVI
   
USB cable
  
SD card

Operating Instructions
   
3.2 Connections and operating elements
Patient
at least 1.5 m
from video components
which do not correspond
to EN-60601-1
Non-medical product
For guaranteeing shortest connecting paths, the video components (recorder, printer,
monitor, etc.) should be positioned near to the ATMOS® Cam 21 / 31.
Please pay attention to operate all video components from one mains distributor.
All additional equipment which is connected to the analogue and digital interfaces of
the device must meet the requirements of relevant EN specifications (for inst. EN 60950
for data processing equipment and EN 60601-1 for electrical medical equipment). In
addition, configurations must satisfy system specification EN 60601-1-1: 2001. When
additional equipment is connected to the signal input or signal output section on the
device, the person carrying out the connection is deamed „a system configuration
operator“ and as such is responsible for meeting the requirements of system
specification EN 60601-1-1: 2001. For answers to additional questions, please contact
your local specialist supplier or the ATMOS Technical Service.
Please note that the use of components other than listed in chapter 8.0 may have a
negative influence on the image quality due to flickering and image drop outs.