13
9.1. SWITCHING THE DEVICE ON
1. Once you have completely installed the device as described in the
Start-up chapter, you can switch it on.
2. Set the on/off switch 2) to position I.
> The on/off switch (2) is illuminated.
> The device is switched on standbay and runs at the
set fan speed of 10%.
ON/OFF SWITCH
Switch device on or off;
Lights up when the device is switched on
Make sure the breaks are on and do not move during operation.
MODE BUTTON
Setting the fan level with
different illuminations
9.2. ADJUSTING THE FAN SPEED
1. The device must be switched on.
2. The device offers 3 fan speed modes.
3. Wait between the switching modes.
4. Switch to the respective levels 1, 2 or 3 by
repeatedly tapping the mode button
> The selected fan stage will start running.
The fan keeps running for approx. 30 Seconds to dissipate the residual
heat. The device can be restarted without any waiting time.
9.3. SWITCHING THE DEVICE OFF
1. Press the mode button (10 until the LED light turns off.
2. The on/off switch (2) must be set to „0“.
3. Switch off the device by disconnecting the mains plug
from the mains socket.
2
2
2
10
UV-C +
LED FAN
ULTRASONIC
MODE COLOR
LEVEL
CFH
TREATMENT
0
Off
0%
0
–
1
Blue
33%
5,244 1
2
Green 67%
10,647 1
3
Red
100%
15,892 1
Switching the device on
Mode button
Ventilation Performance Steps
10
ATMOFIZER PRO – USER MANUAL – 9.OPERATION
10
2
