SAM4S-EK Development Board User Guide
3-1
11139A–ATARM–29-Nov-11
Section 3
Power Up
3.1
Power up the Board
Unpack the board taking care to avoid electrostatic discharge. Unpack the power supply, select the right
power plug adapter corresponding to that of your country, and insert it in the power supply.
Connect the power supply DC connector to the board and plug the power supply to an AC power plug.
The board LCD should light up and display a welcome page. Then, click or touch icons displayed on the
screen and enjoy the demo.
3.2
Sample Code and Technical Support
After boot up, you can run some sample code or your own application on the development kit. You can
d o w n l o a d
s a m p l e
c o d e
a n d
g e t
t e c h n i c a l
s u p p o r t
f r o m
A t m e l
w e b s i t e
http://www.atmel.com/dyn/products/tools.asp?category_id=163&family_id=605&subfamily_id=2404
Figure 3-1.
Atmel Website for AT91SAM Products
